Replacing Upvc Window Handles
Replacing the window handles of upvc is a breeze if you follow the right steps. Knowing the type of handle you have is vital as is determining the size of the spindle to ensure that you purchase the correct replacement.
Open the window first to gain access. Then, look for screw covers that are above or below the handle. take them off using a butter knife or a flat-headed screwdriver.
Identifying the Handle
It's time to replace your double-glazed window handle if the handle breaks or becomes difficult to operate. The good news is that replacing a upvc window handle is a DIY project that can be accomplished quickly and cheaply. The trick is to identify your handle's type and determining the length of the spindle to ensure that the new handle is a good fit. Here's how you do it:
Most windows made of uPVC use espag or cockspur handles. Both types have a mechanism that slots into a square rod within the frame of the window. The size of this rod determines the operation of the window handle and whether or not it is able to lock. Try making the handle loose or locking it to see whether it will open or close the window.
To replace a uPVC handle, you will need to lift the windows to access the screws that hold it to the frame. They are typically hidden under plastic screw covers that are simple to take off using a flat-headed screwdriver. Once the screws are removed, the handle will come off easily.
Before you begin screwing into the new handle, be sure that it's the exact length as the old one. You shouldn't have an handle that is too long or short as it can cause problems in the operation of your windows as well as premature breakage. To avoid this, measure the length of the spindle from the base of the handle to the tip and ensure that the new handle is the same length. You can also purchase an handle with a spindle that is longer or shorter than the one required by your window.
Identifying the Spindle
It is essential to determine the type of handle on your windows made of upvc before you replace them. This will help you choose the right replacement and ensure that it is properly fitted. It's easy to identify the type of handle by taking a look at the handles. You should also note whether the window has a locking mechanism or not. This could affect the ease of opening and closing the window.
If the handle is not secure or doesn't turn, then it's time to replace it. This is particularly true cases where the window is difficult to open or close, or if it is difficult to unlock. It is essential to replace the handle as fast as you can, prior to when it breaks completely. This could pose a risk for children and pets.
Find the spindle on the handle prior to purchasing new upvc handles. This can be found on the back of the handle base and it's crucial to get it right so that the new handle can be a perfect fit. Ideally, the spindle should have a cross-section of 7 mm.
Once you've determined the spindle's length Move the handle to the same place as the old one. Place the spindle in the same hole as the previous one. Fix the new handle into place, and then replace any cap screws if required. Before wrapping your tools, try the new window handle to make sure that it is functioning smoothly and shuts the window correctly. Make use of a silicone-based lubricant ensure that the handle and all moving parts work smoothly.
Unscrewing Old Handle
There are indications that your window handle is in need to be replaced, no matter if it is broken, loose, or not functioning correctly. For instance, if it's hard to open and close the window then this clearly indicates that the handle isn't functioning properly. If your window lock doesn't lock when you turn the lock, it is a clear indication that the handle must be replaced.
It is crucial to be patient and careful when you change the handle of your window. Window handles are heavy and can fall on you if you're not careful. To remove the old handle you'll need to take off the screws on the top and the bottom. Once these screws are removed, you are able to unscrew and take the handle out of the window.
When it comes to selecting a new handle, you can select from a variety of different sizes, types and finishes. But, recommended you read to determine the type of handle you want and measure the spindle length as this is what determines how compatible the new handle will be.
The right size and type of handle will ensure that it is simple to use and secures the window in a secure way. The handle is inserted into a slot on the gearbox of the window. If you choose to use a handle of the wrong size, the window may become stuck or even break. Switching the handle on Everest uPVC Windows is easy and takes just five minutes. This is a great way to enhance the appearance of your window and functionality.
Installing the New Handle
When replacing the handles on windows made of upvc, it is essential that the right size of handle is installed. If the handle is not the correct size, it won't fit comfortably into the frame. This could cause excessive stress and premature breaking. This is most common when windows are opened and closed repeatedly and forcefully, since the handle that is not properly fitted can easily be afflicted by a lack of structural integrity.
The first step is to remove the cap screws that are located below and above the handle by using a thin, narrow tool (for example, a butter knife). This will reveal two screws, which you'll have to take off. Once the screws have been removed then you can begin to remove the handle from the window mechanism. Make sure you hold of the handle to ensure that it doesn't fall and hurt you.
When purchasing replacement windows made of upvc handles, it is necessary to determine the length of the spindle of the old handle. This can be accomplished by measuring the length of the spindle on the handle you used to have. This information will be required when choosing the right handle, as different kinds of uPVC handles have different spindle lengths.
Espag handles, most commonly found on uPVC windows, have seven-millimetre spindles that triggers the internal gearbox which operates the multipoint locking mechanism to provide greater security. Cadenza handles are made with a blade that slots in the lock mechanism. The fixing center can be 58mm or 62mm, according to the design. Cockspur handles have a long nose which locks onto the rods of shootbolts. Their fixing centres can vary from 58mm to 43mm.
Test the Handle
When a window handle is replaced it is important to ensure that the new one functions properly. It is crucial to ensure that the new handle functions correctly. This includes turning the handle to turn on the mechanism, and then ensuring that the window locks and closes correctly. Anyone can change upvc window handles. All you need is the appropriate tools, a bit of patience, and a little knowledge.
The first step is opening the window so that you can get access to the screws that keep the handle in place. They are usually hidden beneath plastic caps or screw covers that you can remove with a screwdriver. After the screws are removed, the handle will easily be removed from the window frame.
You'll then need to determine the type of handle you have installed on your window, and measure its spindle. This will help you buy a replacement handle that is exactly the same size as the existing one. Espagnolette handles usually feature a spindle through the handle that controls the locking mechanism inside the window. They can be right-handed or left-handed. It's important that you match the handle and lock properly when replacing them.
Cockspur handles can be right- or left-handed and are generally fixed in the same way as handles with espagnolette. They have different spindle sizes. Once you've identified the type of handle and measured the spindle, it's easy to change the handle of a cockspur.
After you've screwed your new handle into place it's a good idea to test it by turning it to turn off the lock. You can then replace the cap of the screw and check that everything works before covering it.